General Price List:

Labor – per man hour  $80 

Disassembly/Re-assembly of firearms  $35+ 

Written appraisals – (per gun)  $15 

Clean and Oil (Handguns)  $50+ 

Clean and Oil (Revolvers)  $65+ 

Clean and Oil (Lever Actions/Auto Shotguns)  $80+ 

Clean and Oil (Double Barrels)  $100+ 

Reliability work by labor hour  $80 

Barrel Work:

Check Headspace  $20 

Chamber cast  $50 

Remove stuck fired case***  $50 

Remove live round***  $99 

Remove bore obstruction (By labor hours)  $80 

Install rimfire liner (+liner cost) Requires refinish, additional cost  $250 

Install Centerfire liner (+liner cost) Requires refinish, additional cost  $325 

Cut and crown barrel***  $75 

Fit and Chamber barrel to action (+ blank) Carbon steel requires refinish (additional cost)  $250 

Recontour barrel, Requires refinish, additional cost (per labor hour)  $100 

Install external bolt release  $125 

Install pre-threaded short chambered barrel  $150 

Lap bolt lugs  $65 

Install Sako or m-16 extractor (Includes parts)  $150 

Weld on new bolt handle (+ desired parts)***  $125 

Bolt – Install thread-on bolt handle  $75 

Blueprint Bolt Action Receiver  $275 

Trigger job – Factory*  $75+ 

Install Aftermarket triggers with setting*  $50+ 

Install muzzle brake or suppressor on pre-threaded barrel  $35 

Thread muzzle for brake or suppressor**  $125 

Pin-Weld (+ desired brake or flash hider)  $75 

Barrel Threading (IF barrel must be pulled)  $175 

Cerakote:

Solid color (pistol/bolt action) includes receiver slide(for pistols) and barrel  $150 

Solid color (AR-15) Includes buffer tube receiver set handguard and barrel  $175 

Solid color (shotgun/lever action) includes stocks action barrel &trigger guard  $200 

Additional color  $50 each 

Additional color(camo/pattern)  $75 Each 

Small parts(pins/screws/magazines/scope rings/ muzzle devices etc)  $25-50 depending on size and quantity 

Supressors (high temp cerakote)  $75 

Handgun:

Trigger Job – Single Action Revolver  $80 

Trigger Job – Double Action Revolver  $140 

Port Barrel  $175 

Aftermarket Trigger Install***  $50+ 

Fit new barrel bushing on 1911 (Labor)  $70 

Fit new barrel on 1911 – Non Ramped Barrel  $125 

Fit new barrel on 1911 – Ramped Barrel  $175 

Polish feed ramp   $50 

Hand fit 1911 slide to frame  $200 

Metal checkering  $250 

1911 trigger job or fit new trigger  $125 

Fit new thumb safety (labor only)  $75 

Fit beavertail safety (labor only) Requires refinish on carbon steel   $120 

Crown 1911 barrel   $75 

Polymer frame stippling standard  $150 

Undercut(polymer frame)  $75 

Undercut(steel frame) carbon steel requires refinish  $150 

Metal Finishing:

Metal Finish – Bead Blast (Stainless steel)  $100 

Bluing – blast and blue (bolt action)  $150 

Bluing – blast and blue (auto shotgun/lever action/revolver)  $200 

Polishing for blue(per hour)  $80 

Bluing – Slow Rust Bluing(requires polishing)  $350 

Bluing – Parkerizing – Handgun***  $150 

Bluing – Parkerizing – Long gun***  $200 

Jeweling – Bolt $125

Nitre Blueing  Varies by part size and quantity

zN

Shotgun Work:

Stuck chokes  $60 

Cut for choke  $250 

Raise rib dent   $30 

Raise barrel dents(each)requires refinishing  $65 

Open or modify chokes (Non-plated bore)  $65 

Refit lockup on break action shotguns  $175+ 

Port Barrel (Each)  $145 

Shotgun loading gate modification (w/o refinish)  $200 

Sight Work:

Sight Work – Sight In (Plus Ammo)  $100 

Sight Work – Bore Sight  $25 

Sight Work – Drill and Tap (Per Hole)  $25 

Sight Work – Cut Dovetail (Per Cut)  $75 

Install front Sight – Screw on w/ drill & Tap  $75 

Install front sight – soldered on  $125 

Pattern Shotgun (+desired ammunition selection)***  $100 

Mount and Bore Sight  $45 

Open receiver holes to 8×40  $80 

Slide Alterations:

Custom slide modification porting/serrations/lightening  $80 per labor hour 

RMR / Red Dot Slide cuts $125 

Cut for and fit new sights   $150 

Fit new sights to pre cut slide  $45 

Stockwork:

Refinish – Standard (Hand Rubbed Oil)  $150 

Refinish – Filled (Hand Rubbed Oil)***  $250 

Re-cut Checkering***  $200 

Glass bed action – Bolt Action (Action Only)  $150 

Glass bed action – w/pillars  $200 

Install cross bolts (labor only)  $125 

Install recoil pad (+cost of desired style of recoil pad) $50 

Install adjustable butt plate (+desired parts)  $100 

Sling swivel labor (Standard studs) – Parts additional cost  $35 

Sling swivels labor (Flush Mount) – Parts additional cost  $75 

Recoil reducer – drill stock and install – + cost of reducer  $75 

Adjustable comb – Install only – Parts additional cost***  $150 

Repair cracked / Broken stock (Base price)***  $75+ 

Repair cracked/broken stock with cross pins  $125 

Test Fire:

Safety check and test fire  $25